Competition Entry: Warmachine - Skarre

This is the next competition piece for my local gaming store. This is also my first Warmachine model.

I left off the backpack skulls as I thought that they were really, really silly. The only thing I did to set this one apart otherwise was add glue to the base to simulate water.

After reading the card she comes with I really aimed for a sea witch feel. I wanted her to blend in to the ocean - with only hints of the daemonic energies that keep her afloat.

Unfortunately, once again, I have seriously under powered lights. There are six layers on the blue of her coat and no actual black. Boo hoo. I fiddled with levels (you can tell looking at the blue background) in the various shots. Someone suggested that I use the grey background instead of the blue. I'll try that and post new photos if it's an improvement.

If I understand the competition practice correctly I should know about this one in two weeks.

UPDATE: I replaced the image with a grey background version - much improved.

Product Update: Maybe

I just finished pouring silicone over my first batch of truly marketable bases. My previous bases had all used the GW plastic rounds as a starter - these use rounds I picked up from the local plastics shop.

I spent about three hours sculpting, preparing and now moulding these. Each matches a ruined temple theme: damaged 1 meter tiles and rubble. I kept them simple, clean and, I feel, dynamic without the worry of having the base distract from the miniature.

I plan on basing my Black Templar army on these bad boys...

Assuming I didn't mould them with a fatal flaw.

I won't know until tomorrow morning whether I have a new batch of bases... or simply wasted silicone.

Here's hoping....

UPDATE: All ten bases came out just fine. I have twenty cast and ready to use for my first squad of Black Templar. I'll get a photo of them up some time next week.

Still some clean-up and highlighting to do, otherwise I'm pretty pleased with this guy. Like the Marshal and Emperor's Champion he's being done to a high gaming standard so that I can get him on the table. Unlike the previous command models this one was actually quite a conversion, of course, and I hope to go back and give him some proper painting attention later.

I'll finish out the crozius with a red handle and add some more white to the skulls. I will probably also go in and add some shading to the white on his robes... but we'll see whether I do that or start in on the squads next.

All-in-all quite pleased with how the army is coming along; even if I only have three models on which to base my opinion.

Terminator Librarian - First Place!

I went back today for the monthly painting group at the local store and found out this fella had taken the win on the competition from last month... with all but one vote!

That makes him my first win and the first piece I've had in the display cabinet.

Points on which I'm told he won:

• Flesh and character of his face


• Freehand on the books


• Text "LUX OCCULTA" on the bookmark


• Source lighting on the armour

I got more feedback about how he could have used some OSL from the staff -- and, unfortunately, you can still only see the lighting effect in the first photo. Even in the light box the highlights just look like glare since that's where the light actually falls.

His right knee is still blank since I'll probably send this guy to eBay eventually and add whatever chapter badge by request.

Thanks to everyone that provided feedback.

If anyone still wants additional close-up photos just let me know and I'll see what I can do.

YAY!

Black Templar Emperor's Champion - Final

The finally final version of the Emperor's Champion for my Black Templar army. This model was made using 100% off the sprue parts with no actual conversions.

Most of the bits are from the Black Templar sprues - with the exception of the chest: command sprue company champion and the legs: assault marine sprue. The base was made with cork and gravel... which I will replace when I cast my new line custom of resin bases.

Done to a high gaming standard for use in my 750 point Black Templar army. With this fella done, and the Chaplain/Reclusiarch nearing completion, I should be working on my squads in the next week or so - commissions permitting.

I got a lot of feedback on this guy when I posted him to a couple of servers and this prompted a number of changes:

• Replaced the sculpted chain with actual chain


• Added the skull and shield to the chain


• Replaced the off sized arm on the crozius


• Resculpted the decoration on the left leg


• Sculpted TEMPLAR on to the right pauldron


• Resculpted left hand to be closed instead of pointing


• Modeled with magnetic backpacks in place

I'm quite pleased with the changes for the most part - but now I can't decide whether or not he needs any additional purity/crusade seals. I am particularly ambivalent about the ones I had on his neck. I like the idea of adding long flowing seals, like vestments for this chaplain, but do have to agree that the last round was overkill.

Black Templar Chaplain/Reclusiarch conversion

Playing with conversions today and got this guy to a point I'm happy with. There's still some greenstuff work to come -- going to give him vestments and do something on his legs.

No backpack on him at the moment as I will make it magnetic so I can swap those with the Marshal. He'll wind up being able to use one of the jump packs or the BT backpack.

This fella also took with him a big chunk of my thumb and left a long gash in one of my fingers. Everying people tell you about appropriate use of sharp craft blades is true. Go figure.

Commissioned Forgeworld Valkyrie

This model had been the bane of my existence thanks to a 2mm gap that I couldn't get rid of. Problem finally solved I've gotten the model together and finally started to be able to show some progress.

There's still a long way to go - including a simple display base - but I'm glad to be working on it again. For awhile it simply made me cry.

Commissioned Daemonhunter Chimeras

A pair of Tier 1 Chimeras to match a Daemonhunter army. These bad boys will transport the Stormtroopers in CancerMan's (Relic forum) army.

The freehand was added when the project came in under the allotted time. Overall I'm quite pleased and got the green light today.

WFB Project - Capasus Conversion

I've started in on a WFB conversion project - creating a pegasus captain, a Capasus (hey, I don't make this stuff up), based on the Empire General model. This one will have magnetic arms in the same fashion as the Empire General I did awhile back.

At this point the model includes pins in both legs 1/4" in to the leg and 1" in to the base. After I finish the conversion I will glue the model in place and add a weight for additional stability. I will also add rock, sand and vegetation to the base for additional depth.

This has been a fantastic break from my other current projects as I don't do much Warhammer Fantasy. It has also been nice to have a conversion to work on when I'm too tired to paint.

More on this one as other projects start to wrap up.