Tau: Pathfinder Shas'Ui

I got this guy as part of the miniature exchange on the Relic forums and am entering him into the exchange competition.

I decided to weather Shas'Ui only slightly but to really go to town on the shield drone. I figured the shield drone would be old, weathered and pretty damaged from soaking up shots. I didn't repair the gap in his power line only because I'm a lazy git. This was my first Tau and I really enjoyed painting him.

Hello Toycutter

This is just a quick hello to anyone coming to the site for the first time via TOYCUTTER. Thanks for the write-up of my commissar!

http://www.toycutter.com

http://www.misterjustin.com/2009/05/commissar-01.html

Quick Tip: Brush Tub

From the Warp asked the hobby blogger community to submit "your one best painting tip." Mine isn't strictly painting but since it's my most shared tip RELATED to painting I'm putting it forward for the thread.

The photo is a three cavity painting tub. I picked this one up at Michael's Arts & Crafts in the USA for $1.99 -- although I wasn't able to find one on their website. It is, without exception, the only thing other than paints, brushes and models that I think every hobby painter MUST OWN.

This will extend the life of your brushes dramatically. Add a bit of brush cleaning soap - some people use regular dish soap - in the big chamber and it's even better. If I had to give up all of my fancy gadgets and tools but for one this is what I'd keep.

Quick Tip: Gloss vs. Flat Sealer

A gloss sealer will give the model a smooth, glass like finish; a flat or matte sealer has a rougher texture. But Gloss and flat sealers do more than change the finish on a model.

For instance, decals are easier to apply, and will last longer, on a gloss surface.

Here's a quick breakdown of which surface is better for various techniques:

Gloss	Flat/Matte
Overall washes	Oil filters
Decals	Panel line washes
Protect acrylics	Drybrushing
	Oil filter (dot method)
	Pastels/Pigments

Knowing which sealer to apply for which technique will help you decide in which order to apply weathering techniques.

For instance you should always apply a gloss layer before and after applying decals. However putting gloss over pigments/pastels will likely make most of your effort disappear.

GM 2.5 ton 01

It's time for an update on the 2.5 ton truck:

Although not strictly accurate I'm going to paint the canvas over the cargo as an American flag.

The truck was painted using the oil filter and pigment weathering methods - the latter of which I've already posted a tutorial for. I hope to have the oil filter tutorial finished shortly.

There will also be a generous coating of mud in place before the model is finished -- complete with a mud tutorial.

Mmm, it must be tutorial season....

Weathering With Pastel Powders

While considering which weathering tutorials to write up and where I would start I realized I have a Tamiya 2.5 Ton Cargo Truck sitting on my desk. Although it's not a 40k I'm going to use most of the techniques in my arsenal to get it finished and realized this made it the perfect tutorial project.

First up is an introduction to weathering with pastel powders. I'm using "Doc O'Brien's" for this tutorial. I'm happy with the product, and you get a few colours it's harder to match with art store pastel sticks, but you can do this much less expensively with generic art pastels and some sandpaper.

This is the un-weathered cab. I have base coated the interior and painted the seats.



The colors I'm using are "Rust Red," "Rust Brown," "Grimy Black" and "Dirt Brown." I will use Testors enamel thinner sparingly as we go - and that bottle will likely last me several years.



I bought a $3 pack of crappy brushes to use with powders. I took one of them and cut it off about 10mm or 1/4" from the ferrule. Using this brush I applied "Rust Red" in a generous layer. You can blow off, brush off or wipe off excess - like I do in the next step.



Using another cheap brush I applied some enamel thinner and wiped away a bit of the "Rust Red" powder. This also helps get the remaining powder into the recesses and will bind it more permanently to the model. In the image on the right I have added the "Rust Brown" powder.



Application of more thinner (left) and "Dirt Brown" (right).



Application of "Grimy Black" gives us the finished image for the deck plate. In the bottom image you can see where I stippled the rust near where feet would kick getting into the truck. Always remember that corners will be more heavily weathered in most vehicles. I applied additional black, and then thinned heavily, where the driver's feet would rub.



These techniques and materials can be used to create incredibly realistic rust, dirt and grime and are very well suited to vehicles. Use them on engines, treads, bolts, hatches... anywhere you'd expect to find gunk and rust.


Next up... playing with oil!

Blood Company 01

Blood Company 01
Originally uploaded by misterjustin

My "Not Dante" model is still going to be leading a Death Company. Because my army is black/white I decided to call these guys the "Blood Company" and put them in all red armor. For the sake of fluff I'll say that these are original suits of Blood Angels armor from the second founding.

Conversions are simple arm swaps and removing the silly bits of terrain some of their feet were attached to. The latter gives a better impression of landing and also eliminates the image of these highly trained soldiers landing on sharp piles of rubbish.

WinterGuard-Chimera01

WinterGuard-Chimera01
Originally uploaded by misterjustin

I've been working on the weathering techniques and colours for my winter themed Imperial Guard army. Not that I'm going to get to it any time soon -- but it was a good excuse to practice vehicle weathering and snow application.

The snow is PVA, water and baking soda. The mud was applied using water, pastel pigments and PVA; I also dipped the brush in static grass every now and then for additional effect.

Additional stowage is from Venderlein -- although I'll apply it differently on future vehicles and not add any cloth to the hull. It's snowing, raining and horrible -- not so much "put your backpack on the tank" weather.

Commissar 01

Commissar 01
Originally uploaded by misterjustin

This is a Forge World "Death Korps of Krieg Commissar" I'm doing on commission. He is mounted on one of my resin display bases.

The colours were client specific but I asked to practice my NMM on this one. Except for the basket on his sword I'm pleased with the results. At this stage he's roughly 50% completed.

The model itself has been a pleasure to paint. I'm likely to get one of these for myself.

Not Corobulo 03

Not Corobulo 03
Originally uploaded by misterjustin

Although my "counts as Corbulo" model is a bit more plain than I might have liked I'm very pleased with how he's coming along.

His plainness will be offset by the fact he's the only Apothecary in the army.

The display base is a Dark Arts Miniatures product I picked up to see what the other base makers were doing. It's a decent display base but not one I'd recommend to my friends. Of course I might be biased....

I have Not Corbulo sitting on my painting table along with the other ten (ONLY TEN?!!?) Swords of Sanguinius models and they look really nice together. I look forward to having this army finished some day....